Fleet Pilot · Pilot 3–5 trucks.

WEVOLT APEX · TRUCK COMPATIBILITY CHECK

Your 12V Truck.
Our 24V eAPU.
Check the Fit.

WeVolt Apex is designed to add engine-off comfort and auxiliary power to North American 12V semi trucks. Our 24V LiFePO4 house battery is a separate auxiliary battery — it does not replace your truck's original starter batteries.

Keep your truck's starting system. Add a dedicated battery for cab comfort and hotel loads.
HOW WE ASSESS FITMENT

What We Check Behind the Scenes

Four fitment areas determine whether your configuration can be approved. Truck make alone never guarantees a safe installation.

01

Electrical Compatibility

Charger version, battery chemistry, alternator headroom, wiring and protection

02

Physical Fitment

House battery, indoor unit and condenser clearance, mounting and protection

03

System Performance

Cooling duty, 120V appliances, battery load and simultaneous operation

04

Installation Feasibility

Routing, brackets, access, heater fuel/exhaust/coolant and custom accessories

01 PRIORITY CHECK · INSTANT RESULT
QUICK ELECTRICAL COMPATIBILITY

Does Your Truck Match Our Charging System?

Choose your truck voltage, starter battery type and alternator rating. See an instant, easy-to-read electrical match result and whether WeVolt will configure your charger before shipment.

1What is your truck's electrical system voltage?
2What type of starter batteries does your truck use?
Different starter batteries? We can configure the charging profile.Our standard charger settings are for AGM / GEL. For flooded lead-acid, WeVolt can match the confirmed battery charging requirements and configure voltage, current and protection settings at the factory before shipment, subject to engineering confirmation. Lithium requires additional BMS review.
3What is your alternator's rated output?
ALTERNATOR COMPATIBILITYRated-output pre-screen · final available capacity must be verified

WeVolt's 12V-to-24V DC-DC charger is designed to work with a wide range of truck alternators.

100A+Minimum screening rating — passes the nameplate-rating pre-screen; below 100A requires individual review.
200A+Recommended for full 50A charging, subject to usable electrical capacity.
≈120ADC-DC input current needed for full 50A charging at 13.8V, available after truck loads.
Not sure? Enter an estimate or send us a nameplate photo. WeVolt must confirm actual alternator output, truck loads and DC-DC input current before final approval.
YOUR PRELIMINARY RESULT
MORE INFORMATION NEEDED
First, Confirm Your Voltage

Your answers will update this result instantly.

Select Truck Voltage

The standard WeVolt Apex architecture is designed for 12V trucks with a separate 24V house battery.

Starter battery / charging profileWaiting for electrical details
Alternator verification
RATING UNKNOWN · ENGINEERING REVIEW
Alternator rating is unknown. This does not mean incompatible; send the nameplate or truck specification for engineering review.
Next actionSelect truck voltage and starter battery type.
How to read the result: profile match is not installation approval. WeVolt confirms actual alternator output at operating RPM, vehicle electrical loads, input power and charge limits before approving a 50A configuration. 100A is the minimum rating for initial screening; 200A+ is recommended for full 50A charging, with approximately 120A available to the charger at 13.8V. Final engineering approval is still required.
Adjustable Charging Current — WeVolt can configure DC-DC charging current based on your truck's electrical system before shipment.

Your alternator must supply both the truck's electrical loads and the DC-DC charger. Our team will verify available capacity and configure the charger before shipment.

Your truck. Your charging configuration.

A 100A+ rating only passes the nameplate screening; it does not confirm full 50A charging or final installation approval. The ≈120A input requirement is a planning estimate at 13.8V and must be confirmed against the final charger specifications and operating conditions.
02 VEHICLE & INSTALLATION DETAILS

Will the System Fit Your Truck?

You've checked the core charging architecture. Tell us a little more about your truck so we can plan mounting, cab A/C placement and the right Apex configuration.

Truck Identification

Where Could the Battery & A/C Go?

Battery enclosure: 500 × 345 × 230 mm. Published A/C body dimensions: indoor 534 × 315 × 222 mm; outdoor 682 × 465 × 192 mm. Leave additional room for brackets, airflow, piping, access and service.

Choose the System You Want to Install

Extra questions appear only when your selected system needs them.

Important: For outside-chassis battery installations, IP65 alone does not cover stone impact, crash exposure or mounting strength. WeVolt reviews protective enclosures, brackets and cable protection as needed. For A/C, both indoor and outdoor spaces must be checked.
03 OPTIONAL AT FIRST · IMPORTANT BEFORE APPROVAL
PHOTO & MEASUREMENT GUIDE

Four Photos. A Faster Fitment Review.

Not sure about a technical answer? That's okay. Start your check now and send these photos later. A photo with a tape measure is often more useful than a guessed dimension.

01 · Starter Battery

Battery chemistry label and visible connection layout.

02 · Alternator Label

Rated amperage or model number on the nameplate.

03 · Battery Area

Proposed mounting spot, clearance and available measurements.

04 · A/C Locations

Under-bunk area and proposed exterior condenser location.

Photos are not uploaded or stored by this standalone page. Attach them when you contact WeVolt. Do not expose energized wiring or dismantle the alternator to take photos.
04 ENGINEERING REVIEW · FINAL DECISION
HOW FITMENT IS APPROVED

Quick Self-Check First. Engineering Approval Before Installation.

WeVolt turns your answers into a configuration recommendation, rather than approving a truck from its make, year or alternator label alone.

01Preliminary Self-Check

Identify standard DC-DC profile, custom needs and missing information.

02Fitment Review

Confirm charging headroom, mounting locations, A/C clearance and selected loads.

03Configuration & Quote

Agree charger settings, protective parts, brackets or system adjustments.

04Approved Installation Plan

Release the reviewed configuration with installation instructions and protections.

Customizable Charging

WeVolt can review tailored charging voltage, current and protection settings for different starter batteries, subject to engineering approval.

Truck-Specific Fitment

Protection enclosure, brackets, wiring paths and A/C positioning are assessed around the truck.

Real-World Loads

Comfort, appliance demand and simultaneous power determine whether load management is needed.

Safer Project Handover

Technical questions are resolved before the final configuration is approved for installation.

YOUR NEXT STEP

Ready to Get Your Truck Reviewed?

Send your preliminary electrical result, truck model and preferred Apex system to WeVolt. We'll advise whether the standard architecture is a starting point, what needs customization and which photos or specifications to provide next.

Send My Fitment Details

The email button opens your email app with an editable summary. Nothing is submitted automatically. Add any photos as attachments before sending.

My Truck Fitment Snapshot

WEVOLT TRUCK COMPATIBILITY PRE-SCREEN
Electrical preliminary result: MORE INFORMATION NEEDED
Result explanation: First, Confirm Your Voltage
Truck voltage: Not provided
Starter batteries: Not provided
Alternator: Not provided / not verified
Alternator screen: RATING UNKNOWN · ENGINEERING REVIEW
DC-DC profile: Waiting for electrical details
Truck: Not provided
Cab type: Not provided
House battery location: Not provided
A/C indoor: Not provided
A/C condenser: Not provided
Available space: Not provided
Apex system: Not provided

ALTERNATOR SCREEN: Below 100A or unknown = engineering review; 100A+ = passes rated-output screening; 200A+ recommended for full 50A charging, subject to available electrical capacity.
FULL 50A CHARGING: Approximately 120A available to the DC-DC charger at 13.8V after truck electrical loads (planning estimate; engineering verification required). WeVolt can adjust charging current before shipment.
Engineering must validate alternator available output at working RPM, actual vehicle loads, charger input requirements, battery charging profile, wiring, fusing and mounting before final approval.
Please advise my recommended configuration and any required customization.
This is a pre-screening record, not an installation certificate.
COMMON FITMENT QUESTIONS

Before You Order

Will Apex replace my existing 12V starter batteries?

No. The Apex 24V house battery is an additional auxiliary battery for engine-off comfort and hotel loads. Your existing starter batteries remain in place. The appropriate DC-DC configuration links the two systems for controlled charging.

My truck uses flooded lead-acid or lithium starter batteries. Can WeVolt help?

For a 12V truck with flooded lead-acid starter batteries, WeVolt can review the exact battery specification and configure suitable charging voltage, current and protection settings before shipment. AGM and GEL are our standard charging profiles. Lithium batteries require individual BMS and charging-safety review; not all configurations are automatically supported.

What alternator size should I have for the standard 50A charging setup?

100A or higher passes our preliminary alternator nameplate-rating check. Below 100A or unknown ratings require individual engineering review—not automatic rejection. We recommend 200A+ for full 50A charging, subject to actual capacity: approximately 120A must be available to the DC-DC charger at 13.8V after the truck's own electrical loads. WeVolt can configure a lower charging current if needed. Actual output at operating RPM, wiring, protections and charger input requirements must be reviewed before final approval.

Can I put the IP65 house battery outside the cab?

Potentially, with a reviewed mounting and protection plan. IP65 addresses dust and water-spray ingress, not impact, structural mounting, road debris, salt exposure or service clearances. An additional protective enclosure or bracket may be needed.

Does every Apex configuration need the same installation checks?

No. Essential needs charging, house battery and split A/C review. Power and Complete add appliance / inverter load checks. Heat and Complete add 12V heater power, diesel fuel, combustion exhaust and engine coolant integration checks.

Quick enquiry

Tell Us What You Need. We'll Find the Right Fit.

Whether it's one truck, an entire fleet, or a business partnership, share your needs and we'll get back with the right solution, pricing, and lead times.

  • Flexible Pricing & Fleet Pilots — Volume pricing from 3 systems, with fleet pilot options available.
  • Free System Configuration — We'll help tailor the 24V eAPU to your truck and requirements.
  • Personal Support Within 1 Business Day — Get a direct response from a WeVolt specialist.

Prefer email? [email protected]

Fleet, dealer, OEM or owner-operator — one form, routed to the right specialist.

Have detailed specs already? Open the full quote form

Up to 10-Year Warranty

Long-term protection on every WeVolt system.

30-Day Returns

Hassle-free returns from the official store.

Lifetime Tech Support

Installation and troubleshooting help, for good.

Factory-Direct Shipping

Straight from our line to your truck.