Fleet Pilot · Pilot 3–5 trucks.

WeVolt Apex · Bidirectional DC-DC Charger

One Charger.
Two Directions.
Built for Your Truck.

Charge your 24V LiFePO4 house battery at up to 50A while driving. Then use stored energy to support your 12V starter battery at up to 100A while parked. One intelligent power module engineered for North American semi-truck eAPU systems.

12V ⇄ 24VIP65 & fanlessACC / RMT controlledNot Sold Separately
Apex · Smart Power Routing12V ⇄ 24V
12V Truck Starting SystemStarter battery + alternator
50A forward · up to 100A reverse
24V House Battery8.04kWh WeVolt Apex LiFePO4
DRIVING · 12V → 24VPARKED · 24V → 12V
Forward Charging50A29.2V output maximum
Reverse Charging100A14.4V output maximum
Rated Power Class1,500WUp to 96% conversion efficiency
AvailabilityIncluded in ApexNot sold separately

Section 01 / Product Highlights

Advanced charging. Engineered for trucking.

Many DC-DC chargers are one-way, built for 12V house batteries or limited to lower 24V charging currents. WeVolt brings together bidirectional high-current conversion, smart park/drive control and truck-ready protection.

01 · THE MAIN DIFFERENCE

True Bidirectional Charging

12V → 24V while driving; 24V → 12V while parked. Forward and reverse energy transfer in one DC-DC module.

02 · FAST HOUSE CHARGING

50A at 24V Output

Up to 50A at 29.2V (about 1.46kW output). Not the same as chargers whose 50A rating applies only at 12V.

03 · STARTER SUPPORT

Up to 100A Reverse

Controlled energy transfer to the 12V starter battery at up to 100A, helping maintain starting readiness during parking.

04 · AMERICAN TRUCK FIT

12V Truck, 24V eAPU

A relatively uncommon combination: high-current 12V-to-24V charging with reverse support, tailored to North American 12V truck systems.

05 · AUTO POWER MANAGEMENT

Intelligent Drive / Park Logic

ACC forward / RMT reverse control, with low-voltage cutoff, lithium full-charge cutoff and anti-backflow protection.

06 · BUILT FOR THE ROAD

IP65, Fanless & Shock-Resistant

Sealed construction, passive cooling and a −40°C to +55°C published working range for demanding trucking installations.

Built for harsh trucking environments with IP65 and shock-resistant construction
Harsh-environment durabilityIP65 protection, shock-resistant construction, wide operating range and fanless natural cooling
Bidirectional 12V to 24V truck charging and reverse support
Bidirectional architectureTruck power flow
Fast charging the 24V eAPU battery during driving
Fast driving rechargeApprox. 5–6 hours for a matched 8.04kWh battery under favorable conditions
Automatic 24V to 12V starter-battery charging while parked
Smart parked-mode supportUp to 100A reverse charging, subject to operating conditions
Intelligent battery protection: overvoltage, overcurrent, short-circuit, overheat and reverse-current safeguards
Intelligent battery protectionOvervoltage, overcurrent, short-circuit, overheat and reverse-current safeguards, plus soft start, thermal derating and lithium full-charge cutoff
Real-world charging note: Both 50A forward and 100A reverse are maximum ratings, not constant charging currents. Actual power depends on vehicle voltage, alternator capacity, battery condition, wiring and temperature. The charger supports the starter battery; it does not guarantee an engine start.

Section 02 / Technical Specifications

Clear specs. No confusing amp ratings.

Model WTDC-12-24V-50A. Forward and reverse output specifications are shown separately. Values below follow the WeVolt component specifications; use the latest installation guide for final wiring design.

Power & Charging

Product modelWTDC-12-24V-50A
Charging topologyBidirectional DC-DC (12V ⇄ 24V)
Forward (driving)12V → 24V · 29.2V / up to 50A
Reverse (parked)24V → 12V · 14.4V / up to 100A
Rated power1,500W
Conversion efficiencyUp to 96%
Charging methodCC / CV
Input range / peak10–60V DC / 60V peak
Maximum input current105A

Environmental & Physical

IP protection ratingIP65
Operating temperature−40°C to +55°C
Cooling methodFanless natural cooling
Dimensions (L × W × H)200 × 178 × 60 mm
Weight≤ 2.7 kg
Published MTBF≥ 200,000 hours (design estimate)
Product warranty2-Year Limited Warranty
Standalone availabilityNot Sold Separately

Controls & Communication

Forward controlACC · Driving mode
Reverse controlRMT · Parking mode
RS-485Supported
Bluetooth / appOptional (configuration dependent)
Charging cutoffsLow-voltage cutoff; lithium full-charge cutoff
Current managementSoft start and thermal derating
Reverse-current safeguardAnti-backflow protection

Electrical Protection & Wiring

Built-in input fuse150A (manufacturer specification)
Published cable recommendation4 AWG (verify each cable run)
OvervoltageProtection provided
OvercurrentProtection provided
Short circuitProtection provided
OvertemperatureProtection provided
System fitmentMatched to WeVolt Apex 24V eAPU

Installation: what your technician should confirm

  • Check the truck alternator/starter system and the 24V house battery chemistry and charge limits.
  • Connect ACC and RMT control signals as specified for correct drive/park logic.
  • Size every input/output cable, fuse and termination based on its current, length and applicable installation standard. 4 AWG is the published recommendation, not a substitute for circuit-specific sizing.
  • Do not bypass the built-in fuse or assume it replaces every external circuit fuse.
  • Before servicing, isolate all battery and alternator supply paths, not only the main eAPU switch.

Battery management & eAPU integration

Designed for 12V semi trucks using a 24V LiFePO4 eAPU energy platform. A matched charger helps replenish the house battery while driving and can transfer available house energy back to support the starting battery when parked.

Essential eAPUPower eAPUHeat eAPUComplete eAPU

Charging duration: around 5–6 hours from approximately 20% to 100% for the 8.04kWh pack is an estimate under favorable conditions, not a universal guarantee.

Reverse-support limits: depends on the 24V pack's state of charge, control settings and starter-system conditions. Do not rely on it to compensate for a failing starter battery.

Important questions before you order

Can a 12V semi truck charge a 24V LiFePO4 eAPU battery?

Yes, through a correctly installed 12V-to-24V DC-DC boost charger. Never wire a 24V house battery directly to the truck's 12V starter system.

Is the WeVolt charger really capable of up to 100A reverse charging?

WeVolt's published reverse maximum is 14.4V / up to 100A from the 24V house battery to the 12V starter side. It is an upper rating; actual charge current is controlled by voltage, temperature, state of charge and vehicle operating conditions.

Does every “50A DC-DC charger” deliver 50A at 24V output?

No. Some multi-voltage products list 50A for 12V output but only 25A into 24V batteries. Always check the output at the actual target voltage and available 12V input power.

Do I still need starter-battery protection?

Yes. Properly matched battery management, fusing and wiring remain essential. The charger has low-voltage cutoff and anti-backflow functions, but reverse charging cannot guarantee an engine start.

Is the WeVolt DC-DC charger sold separately?

No. It is included in eligible WeVolt Apex Essential, Power, Heat and Complete eAPU system configurations, with configuration confirmed during ordering.

Section 03 / Competitor Comparison

WeVolt DC-DC Charger vs. Other Chargers.

Compare 22 representative charger models by charging route, actual 24V charge output, reverse support and equipment price. This comparison focuses on the functions that matter in a 12V Class 8 truck with a 24V eAPU battery.

Up to 100AReverse starter support

WeVolt: 24V → 12V. Compare with Sterling BB1224120's published 50A at 12V reverse output.

50A / 24VHigh-output forward charge

Twice the published 24V charge-current rating of selected Renogy IP67 50A units (25A at 24V).

12V ⇄ 24VA rarer charging route

Many DC-DC units serve only 12V house batteries; true cross-voltage bidirectional support is less common in this representative set.

All-in-OnePart of the Apex platform

Not sold separately. Charger, house battery and truck A/C are selected as an integrated 24V eAPU system.

Interactive Technical Comparison

24V House-Battery Charging Output (A)

Published maximum output ratings for selected models; test conditions differ.

WeVolt · WTDC-12-24V-50A12V → 24V
50A
Sterling · BB122412012V → 24V
58A
Victron · Orion XS 140012/24V → 12/24V
50A
Renogy · IP67 50A12/24V → 12/24V
25A
Renogy · PRO IP67 50A12/24V → 12/24V
25A
Mastervolt · Mac Plus12V → 24V
30A
KISAE · DMT243012/24V → 24V
30A
Victron · Orion-Tr Smart12V → 24V
15A
Victron Orion XS 1400 advertises a 50A maximum, but 12V→24V operation can be power-limited. 50A at 12V output and 50A at 24V output are not equivalent.
The difference behind the 50A label: Renogy IP67 50A chargers in this benchmark show 50A for 12V output but 25A for 24V. Victron's Orion XS 1400 lists a 50A maximum, but the same 50A output should not be assumed under every 12V→24V boost condition. Some competitor options offer MPPT solar charging or longer standalone warranties; choose by application, not a universal brand ranking.
22 of 22 models
Brand / ModelPrice (USD)24V Charge OutputReverse ChargingCharging RouteReverse Mode12V Charge OutputMPPTWarrantySpecification Context
WeVoltWTDC-12-24V-50A · 24V 50A BidirectionalNot Sold Separately50AHouse → starter · up to 100A12V → 24VManaged / automatic—No2 yearsUp to 50A at 29.2V forward; up to 100A at 14.4V reverse (maximum rated values). ACC/RMT-managed charging. Actual current depends on system conditions.
SterlingSaturn BB1224120$96958A50A @ 12V / 25A @ 24V12/24V → 24VAutomatic / forced—No5 years120A refers to input current; manufacturer website describes up to 60A 24V output.
SterlingSaturn BB12120$898—40A12V → 12VAutomatic / forced110ANo5 years120A is input current; manufacturer manual lists 110A charging output.
SterlingSaturn BB1270$698—20A12V → 12VAutomatic / forced60ANo5 years70A refers to input current, not the 60A charging output.
REDARCBCDC Alpha50$735—Solar maintenance + recovery12/24V → 12VSolar / recovery50AYes2 yearsSupports 12V/24V alternator input; the house-battery output is 12V.
REDARCBCDC Alpha100 R$1,849—Solar maintenance + recovery12/24V → 12VSolar / recovery100AYes2 yearsThe R variant is a distinct model; do not assume Alpha50 environmental rating.
REDARCBCDC Classic40$620—Not Disclosed12/24V → 12VNot Disclosed40AYes2 years24V refers to supported alternator input; not 24V house-battery output.
VictronOrion XS 1400$356.1550A*App-activated emergency · 25A12/24V → 12/24VEmergency / app50A*No5 years50A is a model maximum; 12→24V may be ≈24A under representative conditions (estimate, not test).
VictronOrion-Tr Smart 12/24-15$219.315ANot Disclosed12V → 24VNot Disclosed—No5 years360W at 40°C; output current can fall at higher battery-charge voltages.
VictronOrion XS 12/12-50A EMC$328.1—App-activated emergency · 25A12V → 12VEmergency / app50ANo5 yearsReverse enabled by suitable firmware; 12V house-battery application only.
VictronOrion XS 12/12-70A$395.25—App-activated emergency · 35A12V → 12VEmergency / app70ANo5 yearsIP20 unit with IP65-rated electronics; not a 24V house-battery solution.
RenogyIP67 50A with MPPT$299.9925AStarter trickle (current ND)12/24V → 12/24VSolar / trickle50AYes5 yearsThe 50A headline is for 12V output; rated 24V charge current is 25A.
RenogyPRO IP67 50A with MPPT$409.9925ANot Disclosed12/24V → 12/24VNot Disclosed50AYes5 yearsDespite the PRO label, 24V charge output is 25A; 50A applies at 12V.
RenogyREGO 12V 60A$593.99—House → starter · 30A12V → 12VAutomatic / maintenance60ANo5 years12V system only; benchmark price corresponds to a version with bundled cables.
RenogyDCC 12V 60A$224.99—Not Disclosed12V → 12VNot Disclosed60ANo1 year12V-only house charging; intended for protected/sheltered installation.
LiTime12V 60A DC-DC$189.99—Not Disclosed12V → 12VNot Disclosed30A / 60A selectNoNot Disclosed1000W claim refers to input capability, not 24V charging output.
MastervoltMac Plus 12/24-30 CZone$545.9530A maxNot Disclosed12V → 24VNot Disclosed—NoNot DisclosedRated 30A is a maximum; 12→24V charge current at 29.2V needs conditions.
KISAEABSO DMT2430$259.9930A maxNot Disclosed12/24V → 24VNot Disclosed—Yes1 yearConfirm delivered 12→24V current with manufacturer for specific input voltage.
ECO-WORTHY12V 40A MPPT$149.99—One-way only12V → 12VOne-way40AYesNot DisclosedOne-way 12V house charging; benchmark listing was sold out.
CTEKD250SE$599.99—Solar starter maintenance12V → 12VSolar / maintenance20AYes2 yearsSMARTPASS current must not be confused with D250SE charger output.
KISAEABSO DMT1250$249.99—Not Disclosed12/24V → 12VNot Disclosed50AYes1 yearCheck conditions: cited manual excludes some commercial-use warranty claims.
EcoFlow800W Alternator Charger$259—Portable → starter · 800W12/24V → 40–60VPortable recovery—NoNot DisclosedPortable power-station charger; not direct 24V LiFePO4 house-battery charger.

Representative and non-exhaustive comparison. Competitor prices were recorded in the October 9, 2026 benchmark and may change with promotions, inventory or retailer terms. Equipment prices generally exclude shipping, installation and tax. WeVolt is Not Sold Separately, so competitors' standalone prices are not directly comparable with an Apex system price. “Not Disclosed” means comparable information was not established in the benchmark, not that the feature is absent. Forward/reverse peak ratings and 12V/24V charging modes are not standardized side-by-side test results.

Buying guidance: A charger that supports 24V alternator input does not necessarily charge a 24V house battery. Automatic bidirectional charging, app-triggered emergency recovery and solar trickle maintenance are different operating modes. Verify all three when comparing brands.

Built Around Your Truck

Intelligent charging is the heart of a reliable eAPU.

Engine-off cooling and 120V hotel loads begin with a properly managed house battery. WeVolt's bidirectional charger helps keep your 24V auxiliary system replenished while driving and supports your 12V starter battery when parked.

Compare Apex eAPU Systems →

WeVolt Apex / Customized Truck Power

One Charger. Two Directions.
One Complete eAPU Platform.

Tell us your truck make, model, voltage and route. We'll help identify the Apex eAPU configuration, installation accessories and charging system that fit your truck.

Explore All Components

Quick enquiry

Tell Us What You Need. We'll Find the Right Fit.

Whether it's one truck, an entire fleet, or a business partnership, share your needs and we'll get back with the right solution, pricing, and lead times.

  • Flexible Pricing & Fleet Pilots — Volume pricing from 3 systems, with fleet pilot options available.
  • Free System Configuration — We'll help tailor the 24V eAPU to your truck and requirements.
  • Personal Support Within 1 Business Day — Get a direct response from a WeVolt specialist.

Prefer email? [email protected]

Fleet, dealer, OEM or owner-operator — one form, routed to the right specialist.

Have detailed specs already? Open the full quote form

Up to 10-Year Warranty

Long-term protection on every WeVolt system.

30-Day Returns

Hassle-free returns from the official store.

Lifetime Tech Support

Installation and troubleshooting help, for good.

Factory-Direct Shipping

Straight from our line to your truck.